DOCUMENT:Q103049 26-JAN-1994 [W_NT] TITLE :How to Remove Windows NT Boot Sector PRODUCT :Windows NT PROD/VER:3.10 OPER/SYS:WINDOWS KEYWORDS: ---------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT operating system, version 3.1 - Microsoft Windows NT Advanced Server, version 3.1 ---------------------------------------------------------------------- This article details procedures that enable you to remove Windows NT boot sector from your system. Before you begin, make sure you know where Windows NT is installed, how much of it you want to remove, and how your hard disk drive is partitioned and formatted. Then, go to one of the following sections: - Removing Windows NT from the Boot Sequence - Removing a Primary NTFS Partition Removing Windows NT from the Boot Sequence ------------------------------------------ There are two ways to remove the Windows NT boot sector from your machine: - If you want to return to your original MS-DOS configuration, boot MS-DOS and type "sys c:" (without the quotation marks). This command replaces the Windows NT boot sector with the MS-DOS boot sector, and allows your machine to boot straight into MS-DOS. The following files are left in the root directory and can be deleted after you perform the SYS operation: PAGEFILE.SYS BOOT.INI NTLDR NTDETECT.COM NTBOOTDD.SYS NOTE: NTBOOTDD.SYS is installed only if you have a SCSI Host Adapter installed in Windows NT. - If you want to leave NTLDR on the disk, you can boot MS-DOS without prompting by changing the startup operating system and time-out value. To do so, choose the System icon in the Control Panel, select MS-DOS in the Startup box, and type "0" (without the quotation marks) in the Show List For box. NOTE: If the primary partition was converted to NTFS, the only way to return to starting MS-DOS only is to reformat the drive and reinstall MS-DOS. See the next section if this is the case. Removing a Primary NTFS Partition --------------------------------- In general, attempts to modify the primary, bootable, NTFS partition fail for the following reasons: - MS-DOS versions 5.0 and 6.0 do not recognize an NTFS partition. The MS-DOS Fdisk program reports an NTFS partition as an OS/2 high-performance file system (HPFS) partition. - You cannot modify or delete an NTFS primary partition within itself. To delete or modify a primary NTFS partition, perform any one of the following four procedures: - Boot MS-DOS version 6.0 from a floppy disk and press RETURN to continue installing MS-DOS 6. When prompted to do so, choose "Remove files". - Initiate Windows NT installation from floppy disks or CD-ROM. When prompted to do so, choose "P" to remove the partition. - Use the DELPART utility to delete the NTFS partition. DELPART is provided in the Microsoft Windows NT Resource Kit. Note that DELPART cannot delete a logical drive in the extended partition. - Boot OS/2 version 1.x from a floppy disk and run its Fdisk program. To remove the partition, specify the /D option. Additional reference words: 3.10 uninstall KBCategory: KBSubCategory: WINNT STP ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1994.